ALUMINUM ALLOY INGOT

MANUFACTURERS & SUPPLIERS

We manufacture and supply a wide range of Aluminium alloy ingots used in various diecasting processes such as HPDC, GDC, LPDC, Sand casting, Investment casting etc. Aluminium Alloys ingots are widely used to make components for Automotive, Electrical, Power, Construction, Defense and various other Industries. Over the years we have established ourselves as one of the leading Aluminium alloy ingot manufacturers in India.

Our Aluminium Alloy ingots are manufactured from Virgin Aluminium Ingots, Semi Virgin Material and identified company-rejected scrap, thereby enabling us to give consistent quality regularly year after year. We are an environmentally conscious company; we use the best available pollution control equipment in our manufacturing process. The alloys that we manufacture go through systematic quality checks before it is dispatched to our valuable customers. Many of you may not be aware the quality of the alloy also depends on the type of Silicon Metal one uses. In our case, the Silicon Metal that is used in our alloys is sourced from companies that manufacture world-class Silicon metal using the latest German Technologies.

Aluminum Alloy Casting Processes

Gravity / Sand Casting Primary Alloys
High Purity LPDC Alloys
Pressure Die Casting Alloys
Investment Casting Alloys

Aluminium Alloy Characteristics

Aluminium is a popular engineering material of choice for many applications because of the following reasons:

Light
Strong
High Strength-to-Weight Ratio
Resilient
Ductile at Low Temperatures
Corrosion Resistant
Non-Toxic
Heat Conducting
Reflective
Electrically Conducting
Non-Magnetic
Non-Sparking
Non-Combustible

Aluminium Alloy Chemical Composition - (British Standard BS1490:1988)

Alloy Type	Si %	Fe %	Cu %	Mn %	Mg %	Zn %	Pb %	Sn %	Ni %	Ti %	Additional Elements Others	Each : Total
LM0	0.3	0.4	0.03	0.03	0.03	0.07	0.03	0.03	0.03	-	Al 99.5 Min	- : -
LM2	9.0 - 11.5	1	0.7 - 2.5	0.5	0.3	2	0.3	0.2	0.5	0.2	-	- : 0.5
LM4	4.0 - 6.0	0.8	2.0 - 4.0	0.2 - 0.6	0.2	0.5	0.1	0.1	0.3	0.2	-	0.05 : 0.15
LM5	0.3 0.6	0	0.3 - 0.7	3.0 - 6.0	0.1	0.05	0.05	0.1	0.2	-	0.05 : 0.15
LM6	10.0 - 13.0	0.6	0.1	0.5	0.1	0.1	0.1	0.05	0.1	0.2	-	0.05 : 0.15
LM9	10.0 - 13.0	0.6	0.2	0.3 – 0.7	0.2 - 0.6	0.1	0.1	0.05	0.1	0.2	-	0.05 : 0.15
LM12	2.5	1	9.0 - 11.0	0.6	0.2 - 0.4	0.8	0.1	0.1	0.5	0.2	-	0.05 : 0.15
LM13	10.0 - 13.0	1	0.7 - 1.5	0.5	0.8 - 1.5	0.5	0.1	0.1	1.5	0.2	-	0.05 : 0.15
LM16	4.5 – 5.5	0.6	1.0 - 1.5	0.5	0.4 - 0.6	0	0.1	0.05	0.25	0.2#	-	0.05 : 0.15
LM20	10.0 - 13.0	1	0.4	0.5	0.2	0.2	0.1	0.1	0.1	0.2	-	0.05 : 0.20/Td>
LM21	5.0 - 7.0	1	3.0 - 5.0	0.2 - 0.6	0.1 - 0.3	2	0.2	0.1	0.3	0.2	-	0.05 : 0.15
LM22	4.0 - 6.0	0.6	2.8 - 3.8	0.2 - 0.6	0.05	0.15	0.1	0.05	0.15	0.2	-	0.05 : 0.15
LM24	7.5 - 9.5	1.3	3.0 - 4.0	0.5	0.3	3	0.3	0.2	0.5	0.2	-	- : 0.50
LM25	6.5 - 7.5	0.5	0.2	0.3	0.2 - 0.6	0.1	0.1	0.05	0.1	0.2#	-	0.05 : 0.15
LM26	8.5 - 10.5	1.2	2.0 - 4.0	0.5	0.5 - 1.5	1	0.2	0.1	1	0.2	-	0.05 : 0.15/Td>
LM27	6.0 - 8.0	0.8	1.5 - 2.5	0.2 - 0.6	0.35	1	0.2	0.1	0.3	0.2	-	0.05 : 0.15
LM28*	17.0 - 20.0	0.7	1.3 - 1.8	0.6	0.8 - 1.5	0.2	0.1	0.1	0.8 – 1.5	0.2	Cr 0.6, Co 0.5	0.10 : 0.30
LM29*	22.0 - 25.0	0.7	0.8 - 1.3	0.6	0.8 - 1.3	0.2	0.1	0.1	0.8 - 1.3	0.2	Cr 0.6, Co 0.5	0.10 : 0.30
LM30	16.0 - 18.0	1.1	4.0 - 5.0	0.3	0.4 - 0.7	0.2	0.1	0.1	0.1	0.2	-	0.10 : 0.30
LM31+	0.25	0.5	0.1	0.1	0.5 - 0.75	4.8 – 5.7	0.05	0.05	0.1	0.25#	Cr 0.4 – 0.6	0.05 : 0.15
ALSI - 62	5.5 - 7.0	0.4	1.8 - 2.5	0.2 - 0.6	0.3 - 0.7	-	-	-	-	0.2	-	BAL
ALSI - 132	11.0 - 12.5	1	1.75 - 2.5	0.5	0.3	1.4	0.1	-	0.3	0.1	-	BAL

Aluminium Alloy Chemical Composition (Indian Standard IS 617:1994)

Alloy Designation	Si %	Fe %	Cu %	Mn %	Mg %	Zn %	Ni %	Ti %	Pb %	Sn %	Cr %	Al %	Other Elements	Others Total
1900	0.5	0.6	0.2	0.2	0.05	0.1	0.1	-	0.05	0.05	-	99.0 Min	-	-
1950	0.3	0.4	0.03	0.03	0.03	0.07	0.03	-	0.03	0.03	-	99.5 Min	-	-
2280	0.25	0.25	4.0 - 5.0	0.1	0.1	0.1	0.1	0.2 - 0.3	0.05	0.05	-	Remainder	-	-
2285 2)	0.7	0.7	3.5 - 4.5	0.6	1.2 - 1.8	0.1	1.7 - 2.3	0.2	0.05	0.05	-	Remainder	-	-
2550	2.5	1	9.0 - 11.0	0.6	0.2 - 0.4	0.8	0.5	0.2	0.1	0.1	-	Remainder	-	-
4223	4.0 - 6.0	0.8	2.0 - 4.0	0.2 - 0.6	0.15	0.5	0.3	0.2	0.1	0.1	-	Remainder	-	-
4223A	4.0 - 6.0	0.6	2.8 - 3.8	0.2 - 0.6	0.05	40.15	0.2	0.2	0.1	0.05	-	Remainder	-	-
4225	4.5 - 6.0	0.8	1.0 - 1.5	0.5	0.3 - 6.0	0.5	0.3	0.2 3)	0.2	0.1	-	Remainder	-	-
4300	4.5 - 6.0	0.6	0.1	0.5	0.1	0.1	0.1	0.2	0.1	0.05	-	Remainder	-	-
4323	5.0 - 7.0	1	3.0 - 5.0	0.2 - 0.6	0.1 - 0.3	2	0.3	0.2	0.2	0.1	-	Remainder	-	-
4420	7.5 - 9.5	1.3	3.0 - 4.0	0.5	0.3	3	0.5	0.2	0.3	0.2	-	Remainder	-	-
4420 A	7.5 –9.5	1	3.0 - 4.0	0.5	0.1	2.9	0.5	- - -	- - -	0.35	-	Remainder	-	0.50**
4423	6.0 - 8.0	0.8	1.5 - 2.5	0.2 - 0.6	0.3	1	0.3	0.2	0.2	0.1	-	Remainder	-	-
4450	6.5 - 7.5	0.5	0.1	0.3	0.20 - 0.45	0.1	0.1	0.2 3)	0.1	0.05	-	Remainder	-	-
4520	9.0 - 11.5	1	0.7 - 2.5	0.5	0.3	2	0.5	0.2	0.3	0.2	-	Remainder	-	-
4520 A	9.6 - 12.0	1	1.5 - 3.5	0.5	0.3	1	0.5	0.3	0.2	0.2	0.1	Remainder	0.3	-
4525	8.5 - 10.5	1.2	2.0 - 4.0	0.5	0.5 - 1.5	1	1	0.2	0.2	0.1	-	Remainder	-	-
4525 A	8.0 –11.0	1.3	2.0 - 4.0	0.55	0.1 - 0.5	1.2	1	0.25*	0.35*	0.25	-	Remainder	0.05	0.25
4528	8.5 - 9.5	0.4 - 0.6	1.75 - 2.5	0.8	0.15	0.5	0.8	0.2	0.1	0.1	-	Remainder	-	-
4600	10.0 - 13.0	0.6	0.1	0.5	0.1	0.1	0.1	0.2	0.1	0.05	-	Remainder	-	-
4600A	10.0 - 13.0	1	0.4	0.5	0.2	0.2	0.1	0.2	0.1	0.1	-	Remainder	-	-
4628	11.0 - 12.5	0.7 - 1.1	1.75 - 2.5	0.5	0.3	1.5	0.3	0.2	0.05	0.1	-	Remainder	-	-
4635	10.0 - 13.0	0.6	0.1	0.3 - 0.7	0.2 - 0.6	0.1	0.1	0.2	0.1	0.05	-	Remainder	-	-
4652	10.0 - 12.0	1	0.7 - 1.5	0.5	0.8 - 1.5	0.5	0.7 - 1.5	0.2	0.1	0.1	-	Remainder	-	-
5230	0.3	0.6	0.1	0.3 - 0.7	3.0 - 6.0	0.1	0.1	0.2	0.05	0.05	-	Remainder	-	-
5500	0.25	0.4	0.1	0.1	9.5 - 11.0	0.1	0.1	0.2	0.05	0.05	-	Remainder	-	-

Aluminium Alloy Chemical Composition - (Japanese Standard JIS H 5302:2006)

Alloy Type	Si %	Fe %	Cu %	Mn %	Mg %	Zn %	Ni %	Ti %	Pb %	Sn %	Cr %	Al
ADC1	11.0 - 13.0	1.3	1	0.3	0.3	0.5	0.5	0.3	0.2	0.1	-	BAL
ADC3	9.0 - 10.0	1.3	0.6	0.3	0.4 - 0.6	0.5	0.5	0.3	0.15	0.1	-	BAL
ADC5	0.3	1.8	0.2	0.3	4.1 - 8.5	0.1	0.1	0.2	0.1	0.1	-	BAL
ADC6	1	0.8	0.1	0.4 - 0.6	2.6 - 4.0	0.4	0.1	0.2	0.1	0.1	-	BAL
ADC10	7.5 - 9.5	1.3	2.0 - 4.0	0.5	0.3	1	0.5	0.3	0.2	0.3	-	BAL
ADC12	9.6 - 12.0	1.3	1.5 - 3.5	0.5	0.3	1	0.5	0.3	0.2	0.3	-	BAL
ADC12Z	9.6 - 12.0	1.3	1.5 - 3.5	0.5	0.3	3	0.5	0.3	0.2	0.3	-	BAL
ADC14	16.0 - 18.0	1.3	4.0 - 5.0	0.5	0.5 - 0.65	1.5	0.3	0.3	0.2	0.3	-	BAL
AC1A	1.2	0.5	4.0 - 5.0	0.3	0.15	0.3	0.05	0.25	0.05	0.05	0.05	BAL
AC1B	0.03	0.35	4.2 - 5.0	0.1	0.15 - 0.35	0.1	0.05	0.05 - 0.3	0.05	0.05	0.05	BAL
AC2A	4.0 - 6.0	0.8	3.0 - 4.5	0.55	0.25	0.55	0.3	0.2	0.15	0.05	0.15	BAL
AC2B	5.0 - 7.0	1	2.0 - 4.0	0.5	0.5	1	0.35	0.2	0.2	0.1	0.2	BAL
AC3A	10.0 - 13.0	0.8	0.25	0.35	0.15	0.3	0.1	0.2	0.1	0.1	0.15	BAL
AC4A	8.0 - 10.0	0.55	0.25	0.3 - 0.6	0.3 - 0.6	0.25	0.1	0.2	0.1	0.05	0.15	BAL
AC4B	7.0 - 10.0	1	2.0 - 4.0	0.5	0.5	1	0.35	0.2	0.2	0.1	0.2	BAL
AC4C	6.5 - 7.5	0.55	0.25	0.35	0.25 - 0.45	0.35	0.1	0.2	0.1	0.55	0.1	BAL
AC4CH	6.5 - 7.5	0.2	0.2	0.1	0.2 - 0.4	0.1	0.05	0.2	0.05	0.05	0.05	BAL
AC4D	4.5 - 5.5	0.6	1.0 - 1.5	0.5	0.4 - 0.6	0.3	0.2	0.2	0.1	0.05	0.15	BAL
AC5A	0.6	0.8	3.5 - 4.5	0.35	1.2 - 1.8	0.15	1.7 - 2.3	0.2	0.05	0.05	0.15	BAL
AC7A	0.2	0.3	0.1	0.6	3.5 - 5.5	0.15	0.05	0.2	0.05	0.05	0.15	BAL
AC7B	0.2	0.3	0.1	0.1	9.5 - 11.0	0.1	0.05	0.2	0.05	0.05	0.15	BAL
AC8A	11.00 - 13.0	0.8	0.8 - 1.3	0.15	0.7 - 1.3	0.15	0.8 - 1.5	0.2	0.05	0.05	0.1	BAL
AC8B	8.5 - 10 - 5	1	2.0 - 4.0	0.5	0.5 - 1.5	0.5	0.10 - 1.0	0.2	0.1	0.1	0.1	BAL
AC8C	8.5 - 10.5	1	2.0 - 4.0	0.5	0.5 - 1.6	0.5	0.5	0.2	0.1	0.1	0.1	BAL
AC9A	22.0 - 24.0	0.8	0.5 - 1.5	0.5	0.5 - 1.7	0.2	0.50 - 1.5	0.2	0.1	0.1	0.1	BAL
AC9B	18.2	0.8	0.5 - 1.6	0.5	0.5 - 1.8	0.2	0.50 - 1.0	0.2	0.1	0.1	0.1	BAL

Aluminium Alloy Chemical Composition - (US Standard)

ANSI	UNS	Si %	Fe %	Cu %	Mn %	Mg %	Zn %	Ni %	Ti %	Pb %	Al %
201.2	A02012	0.1	0.1	4.0 - 5.2	0.2 - 0.5	0.2 - 0.55	-	-	-	-	BAL
204.2	A02042	0.15	0.1 - 0.2	4.2 - 4.9	0.05	0.2 - 0.35	0.05	0.03	0.15 - 0.35	-	BAL
208.1	A020B1	2.5 - 3.5	0.9	3.5 - 4.5	0.5	0.1	1	0.35	0.15 - 0.25	-	BAL
208.2	A020B2	2.5 - 3.5	0.8	3.5 - 4.6	0.3	0.03	0.2	-	0.25	-	BAL
222.1	A02221	2	1.2	9.2 - 10.7	0.5	0.2 - 0.35	0.8	0.5	0.2	-	BAL
241.1	A02421	0.7	0.8	3.5 - 4.5	0.35	1.3 - 1.8	0.35	1.7 - 2.3	0.25	0.25	BAL
242.2	A02422	0.6	0.6	3.5 - 4.5	0.1	1.3 - 1.8	0.1	1.7 - 2.3	0.25	-	BAL
A242.1	A12421	0.6	0.6	3.7 - 4.5	0.1	1.3 - 1.7	0.1	1.8 - 2.3	0.2	0.15 - 0.25	BAL
A242.2	A12422	0.35	0.6	3.7 - 4.6	0.1	1.3 - 1.7	0.1	1.8 - 2.3	0.07 - 0.2	0.15 - 0.25	BAL
295.1	A02951	0.7 - 1.5	0.8	4.0 - 5.0	0.35	0.03	0.35	-	0.07 - 0.2	-	BAL
295.2	A02952	0.7 - 1.2	0.8	4.0 - 5.0	0.3	0.03	0.3	-	0.25	-	BAL
296.1	-	2.0 - 3.0	0.9	4.0 - 5.0	0.35	0.05	0.5	0.35	0.2	-	BAL
296.2	-	2.0 - 3.0	0.8	4.0 - 5.0	0.3	0.03	0.3	-	0.25	-	BAL
308.1	A03081	5.6 - 6.0	0.8	4.0 - 5.0	0.5	0.1	1	-	0.2	-	BAL
308.2	A03082	5.0 - 6.0	0.8	4.0 - 5.0	0.3	0.1	0.5	-	0.25	-	BAL
319.1	A03191	5.5 - 6.5	0.8	3.0 - 4.0	0.5	0.1	1	0.35	0.2	-	BAL
319.2	A03192	5.5 - 6.5	0.6	3.0 - 4.0	0.1	0.1	0.1	0.1	0.25	-	BAL
328.1	A03281	7.5 - 8.5	0.8	1.0 - 2.0	0.2 - 0.6	0.25 - 0.6	1.5	0.25	0.2	0.25	BAL
332.1	A03321	8.5 - 10.5	0.9	2.0 - 4.0	0.5	0.6 - 1.5	1	0.5	0.25	-	BAL
332.2	A03322	8.5 - 10.0	0.6	2.0 - 4.0	0.1	0.9 - 1.3	0.1	0.1	0.25	-	BAL
333.1	A03331	8.0 - 10.0	0.8	3.0 - 4.0	0.5	0.1 - 0.5	1	0.5	0.2	-	BAL
336.1	A03361	11.0 - 13.0	0.9	0.5 - 1.5	0.35	0.8 - 1.3	0.35	2.0 - 3.0	0.25	-	BAL
336.2	A03362	11.0 - 13.0	0.9	0.5 - 1.5	0.1	0.9 - 1.3	0.1	2.0 - 3.0	-	-	BAL
354.1	A03541	8.6 - 9.4	0.15	1.6 - 2.0	0.1	0.45 - 0.6	0.1	-	0.2	-	BAL
355.1	A03551	4.5 - 5.5	0.5	1.0 - 1.5	0.5	0.45 - 0.6	0.35	-	0.25	0.25	BAL
355.2	A03552	4.5 - 5.5	0.14 - 0.25	1.0 - 1.5	0.05	0.5 - 0.6	0.05	-	0.2	-	BAL
C355.2	A33552	4.5 - 5.5	0.13	1.0 - 1.5	0.05	0.5 - 0.6	0.05	-	0.2	-	BAL
356.1	A03561	6.5 - 7.5	0.5	0.25	0.35	0.25 - 0.45	0.35	-	0.2	-	BAL
356.2	A03562	6.5 - 7.5	0.13 - 0.25	0.1	0.05	0.3 - 0.45	0.05	-	0.25	-	BAL
357.1	A03571	6.5 - 7.5	0.12	0.05	0.03	0.45 - 0.6	0.05	-	0.2	-	BAL
A357.2	A13570	6.5 - 7.5	0.12	0.1	0.05	0.45 - 0.7	0.05	-	0.04 - 0.2	-	BAL
359.2	A03592	8.5 - 9.5	0.12	0.1	0.1	0.55 - 0.7	0.1	-	0.2	-	BAL
360.2	A03602	9.0 - 10	0.7 - 1.1	0.1	0.1	0.45 - 0.6	0.4	0.1	0.15	-	BAL
A360	A0360	9.0 - 10	1.3	0.6	0.35	0.4 - 0.6	0.5	0.5	-	-	BAL
A360.1	A13601	9.0 - 10	1	0.6	0.1	0.45 - 0.6	0.4	-	-	-	BAL
A360.2	A13602	9.0 - 10	0.6	0.1	0.05	0.45 - 0.6	0.05	-	-	-	BAL
380.2	A03802	7.5 - 9.5	0.7 - 1.1	3.0 - 4.0	0.1	0.1	0.1	0.1	0.1	-	BAL
A380	A0380	7.5 - 9.5	1.3	3.0 - 4.0	0.5	0.3	3	0.5	0.5	-	BAL
A380.1	A13801	7.5 - 9.5	1	3.0 - 4.0	0.5	0.1	2.9	0.5	-	-	BAL
A380.2	A03602	7.5 - 9.5	0.6	3.0 - 4.0	0.1	0.1	0.1	0.1	0.1	-	BAL
A383	A0383	9.5 - 11.5	1.3	2.0 - 3.0	0.5	0.1	0.3	0.3	-	-	BAL